





9 Tilt Trailers For Sale in
Tulsa, Oklahoma
Tilt trailers in Tulsa. The deck pivots so there are no ramps to lift, which is what sells…
Tilt trailers in Tulsa. The deck pivots so there are no ramps to lift, which is what sells them to anyone loading a scissor lift alone.
Showing all 9 trailers
Don't see what you want?
6.5 X 12 Interstate Single Axle Tilt 5K Trailer
7 X 14 Interstate Single Axle Tilt 7K Trailer
7 X 14 Interstate Single Axle Tilt 7K Trailer
7 X 14 Interstate Single Axle Tilt 7K Trailer
7 X 16 Interstate Full Bed Single Axle Tilt 7K Trailer
Tilt Trailers in Tulsa
The deck pivots on a pin instead of taking ramps. One movement, nothing to lift, nothing to line up. Tilt is a real category at this store rather than an afterthought - it draws more search volume here than at most locations in the network.
6.5x12, single axle 5K
The one most people call about. It takes a mower, a small tractor, or a compact machine on solid tires, and it tows behind a half-ton without drama. Gravity tilt on this size, which is cheaper and perfectly adequate if you are not cycling the deck all day.
7x16 to 7x20, tandem to 10K
Where scissor lifts live. A lift on small solid wheels will not go up a ramp at any sensible angle, and this is the answer. Tandem axles with brakes on both, and hydraulic tilt worth specifying if the deck goes up and down repeatedly during a working day.
What actually makes people buy one
Loading alone. Almost every tilt customer at this store arrived after wrestling a set of ramps into position on their own a few too many times. The second reason is ground clearance - anything with a low front lip, a long wheelbase or small wheels loads far more safely on a tilt.
Ordering notes
Treated commercial-strength wood decks, Dexter axles, radial tires, LED lighting. Deck length is usually the number to get right rather than rating; measure the machine including any attachment left on it. Browse tilt inventory, or bring the machine and we will check the load angle before you commit.
Hydraulic or gravity
Gravity tilt uses the load’s own weight and a latch, costs less, and is perfectly good if the deck goes up and down once or twice a day. Hydraulic tilt is controlled, repeatable and worth the money if you are cycling the deck repeatedly or loading something that would be unsafe to let move on its own.
What to measure before ordering
Machine length including attachments, ground clearance at the lowest point, and wheel or castor diameter. Those three numbers decide whether a tilt is necessary at all and, if it is, how long the deck needs to be. Bring them or bring the machine.
Decks and hardware
Treated commercial-strength wood decks, Dexter axles with brakes, radial tires and LED lighting throughout. The pivot and the cylinder are the parts that define a tilt trailer, and both want servicing on schedule rather than on failure - a seized pivot turns a five-minute load into a recovery.
Who buys them in this market
Rental and equipment operations moving lifts between sites. Landscape crews with a stand-on mower and no wish to fight ramps twice a day. And a steady number of one-machine owners who simply decided they were finished lifting ramps in the rain.
Latches and safety
On a gravity tilt the latch is the whole safety system. Check it every load, keep the pivot greased, and never stand where the deck will travel. On a hydraulic tilt, watch for cylinder weep at the seal - a wet rod is a warning rather than a fault, and it is far cheaper addressed then.
Decks in Oklahoma sun
Commercial-strength wood decks are a wear surface and they take sun as well as traffic. If yours is looking tired, ask during your inspection rather than guessing; it is a quick judgement for someone who sees them daily.

Join The TrailersPlus Community
Stay Up to Date With the Latest and Greatest











